FAQ Glass Splashback Installation
Q: Can I install the splashback myself?
A: Absolutely yes! Installing your splashback using both methods of pre-drilled holes or the high strength glue option, are both straight forward for anyone who is confident with DIY. We would recommend that if you have ordered one of the large splashbacks this would definitely require 2 people to handle the glass. Your splashback will be delivered with an Instruction leaflet however, if you are unsure and would like us to fit it for you, we offer an installation service to anywhere within a 60 mile radius of Melton Mowbray LE14. As further support, we are also happy to talk to you over the phone and give you advice. You may also find that it would help if you take a photo of the space and email it to us at info@isabelscott.com and we will only be too happy to give you some pointers.
Q: How do I measure correctly?
A: The first measurement you need to check is the width. Measure at the bottom of the space across the width and same at the top. This is pretty important if you’re fitting the splashback into a recess, as most wall’s are not perfectly straight. Then measure your desired height of how far up you would like the splashback to go. Any questions, just drop us an email info@isabelscott.com
Q: Can I install the splashback on top of existing tiles?
A: For a perfect result, we would recommend that you apply the splashback to a smooth surface, so no, it’s not advisable to fix on top of tiles, you would need to remove the tiles and prepare the wall. If you have any concerns about the surface you would like to apply the splashback to, take a photo of the space and email it to us at info@isabelscott.com and we will only be too happy to give you further advice.
Q: Should I get pre-drilled holes or high strength adhesive?
A: Either are perfectly suitable, it’s entirely down to your personal preference. If you’re not confident with a drill, then the glue option may be for you. See examples of both types of installations on this page.
Q: There is an image from the Munnings Art Museum that I would like, but can’t see it as an option, would it be available to me?
A: All images from the Munnings Art Museum are available for Isabel Scott to use, it is possible the image may not be suitable for the size, ie it’s more portrait than landscape. However, email us info@isabelscott.com with the details of the painting, we will take a look and see if we can get this to work for you in your space! NB. Some images may need cropping to ensure it fits in your space.
Q: I have a fixed flue on the back wall for my AGA, can the splashback be installed?
A: You may have to have the flue removed for installation. Most flues are cemented into the ceiling above, so unless the glass can slide behind without removing the flue then removal of flue will be your only option here. If you can arrange for the flue to be temporarily removed for the installation, then this would be perfect. You will also need to make sure that there is a minimum of a 6mm space behind the flue for the glass to fit neatly behind. If in doubt send us a photograph and get in contact at info@isabelscott.com
Q: I have ordered a large splashback, will I need someone to help me off load at home?
A: Yes. The large splashbacks are delivered on a pallet. The driver will get the pallet as close as possible to your door, depending on the access to the property. We would then recommend that 2 people carry the splashback in to the home. It’s not especially heavy, just awkward for 1 person to manage on their own.
Any questions at all on installation, choosing an image or measuring we are at hand to answer your questions! info@isabelscott.com
